RenoQuantix Calculator

Fence Calculator

Estimate panels or pickets, posts, rails, and gates for a straight-run fence.

Calculator units

Example values are prefilled. Replace them with your project measurements; results update automatically as you edit.

Step 1

What kind of fence are you building?

Choose prefabricated panels or individual pickets.

Fence style

Step 2

Measure the fence line

Enter the full straight-run length including gates. Gate widths are removed from the panel/picket run automatically.

Total fence lengthft Number of gates Width of each gateft

Step 3

Enter the panel width

Use the actual width of the panels you plan to buy.

Panel widthft

Extra allowance% Concrete per post (optional)cu ft/postEnter your own planned volume per post; RenoQuantix does not assume a local footing requirement.

Price per panel or picket (optional) Currency

How it works

How this calculation works

Choose panel or picket mode and enter the total fence-line length.

Gate width is removed from the material run before panels or pickets are calculated.

The calculator estimates the main material plus posts, and picket mode also estimates rails.

Assumptions

What this estimate assumes

This is a straight-run material estimate, not a site survey or structural design.
Corners, changes in grade, gate hardware, end conditions, and local requirements can change quantities.
Post spacing and panel width should match the system you plan to install.

Example

Example: 100 ft panel fence

For 100 ft of fence with one 4 ft gate and 8 ft panels, RenoQuantix removes the gate opening, calculates the base panel count, applies extra allowance, and estimates posts.

Practical tips

Before you buy

Measure each fence run rather than relying on property-map scale.
Confirm underground utility locations before digging.
Check local setback, height, footing, and permit rules separately.

Calculator limits

Use the result as a planning estimate

RenoQuantix turns the measurements and product information you provide into a material estimate. Product specifications, local requirements, installation methods, site conditions, and measurement error can change the final amount you need.

When the project affects structure, safety, code compliance, or regulated work, confirm those requirements separately.

FAQ

Frequently asked questions

Does the calculator include gate hardware?

No. It accounts for gate width and gate count but does not estimate hinges, latches, or specialty hardware.

Are post quantities exact for corners?

No. Corners and complex layouts may need additional posts.

Does this check local fence code?

No. Local rules must be verified separately.

Related calculators